Pepper removal machine pepper removal machine removal rate of more than 95%
It is difficult to discharge materials, the knife edge is easy to wear, the knife jam cage problem caused by the poor adjustment of the gap and pressure between the knife and the cage, the use of inferior parts and the processing technology are relatively low, making the comparison of the use value of the machine short so that customers are difficult to accept.
The working principle of the pepper machine is simply the principle of the shaving knife. The details are as follows: the pepper falls into the cylinder after the arc guide feed from the feed port, the cylinder speed is high, the pepper sticks out of the gap of the drum mesh, and is cut by several groups of stainless steel blades of different directions to complete the process of putting. The roller has a certain inclination, the pepper rolls forward, the roller is equipped with a guide eccentric hole plate, which controls the speed and arrangement of the material without damaging the pepper, the design is scientific and reasonable structure, the blade is made of high carbon stainless steel grinding and quenching treatment cold pressing, durable.
Pepper removal machine can remove line pepper, plate pepper, Chaotian pepper, millet pepper, wild pepper, Beijing red and other categories, multiple varieties of pepper pepper. It can be used to remove dried peppers or fresh peppers.
In this case, a good performance of the pepper cutting machine can ensure that more than 95% of the division rate on the basis of. The machine is easy to operate and can quickly clean up the peppers. It greatly saves manpower and liberates farmers' productive forces. And effectively save the time cost.
We have made a number of humanized improvements to the machine, and the inlet is cleverly designed to make it more convenient for users to put materials and not easy to plug, and the use of imported high-strength knives is more wear-resistant and sharper.
To buy pepper machine should start from several aspects:
First, determine the pepper varieties to be processed. There are three kinds of representative appearance peppers on the market: the plate pepper represented by Beijing Red, and the linear pepper represented by Erjingtiao. As long as it is the same pepper variety, the scissors required are not very different.
Second, determine the model according to the processing amount. At present, the company has three products to choose from, and the processing capacity is from 80 kg to 300 kg per hour.
After the above two are determined, it is necessary to investigate the actual processing performance of the product. The performance of the product has three main indicators: cutting rate, processing capacity, wound tip rate, the larger the first two indicators, the better, the smaller the latter indicator.
Brand is a comprehensive reflection of quality, reliability, after-sales service, and reputation.
All aspects of the old brand have been tested by the market, and the quality will be quite guaranteed. Some of the counterfeit and counterfeit brands just involved have no actual production experience, product quality, after-sales, reputation, etc., are very questionable, once purchased will regret it. About additional features. Some manufacturers on the market can not improve the main function of the product, engage in some deceptive small names. The core function of pepper cutting machine is to cut, please customers must be clear, spend less money.
Service hotline